Test date4 Nov 2025
Expiry—
Test number975350956155
Mileage90,097 mi
MajorHeadlamp aim projected beam image is obviously incorrect both front (4.1.2 (c))
MajorHeadlamp lens seriously defective both front faded and effecting beam image (4.1.1 (b) (ii))
MajorOffside Rear Parking brake inoperative on one side (1.4.1 (a))
MajorRear Brakes imbalanced across an axle (1.2.1 (b) (i))
MajorNearside Rear Service brake excessively fluctuating (1.2.1 (e))
AdvisoryOffside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
MajorOffside Front Service brake excessively binding (1.2.1 (f))
AdvisoryNearside Front Service brake binding but not excessively (1.2.1 (f))
MajorNearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
MajorOffside Front Coil spring fractured or broken (5.3.1 (b) (i))
MajorNearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
MajorOffside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/sill holed (5.3.6 (a) (i))
MajorNearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross-member holed (5.3.6 (a) (i))
AdvisoryRear Suspension component mounting prescribed area is corroded but not considered excessive cross-member badly corroded (5.3.6 (a) (i))
AdvisorySuspension component mounting prescribed area is corroded but not considered excessive vehicle has been excessively welded (5.3.6 (a) (i))
MajorNearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor-inner sill holed within 30cm of seat mount (7.1.1 (a) (i))
AdvisorySuspension component mounting prescribed area is corroded but not considered excessive both outer sills corroded (5.3.6 (a) (i))
Advisorysuspect rear welding repair not seam welded?
AdvisorySuspension component mounting prescribed area is corroded but not considered excessive excess corrosion to underside of vehicle (5.3.6 (a) (i))
AdvisorySuspension component mounting prescribed area is corroded but not considered excessive both front chassis corroded (5.3.6 (a) (i))
AdvisorySuspension component mounting prescribed area is corroded but not considered excessive both front floors corroded (5.3.6 (a) (i))
MajorNearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed next to patch (5.3.6 (a) (i))
AdvisoryOil leak, but not excessive (8.4.1 (a) (i))
AdvisoryFront Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
MajorOffside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
DangerousNearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii))
MajorOffside Front Brake pipe excessively corroded at caliper and part of hose (1.1.11 (c))
MajorFront Exhaust has a major leak of exhaust gases cat (6.1.2 (a))
MajorRear Exhaust has a major leak of exhaust gases joint/sleeve leaking badly (6.1.2 (a))
MajorEmissions unable to be completed due to excessive exhaust leaks (8.2.1.2 (d))
AdvisorySuspension arm corroded but not seriously weakened both front lower arms (5.3.3 (b) (i))
AdvisoryFront Suspension component mounting prescribed area is corroded but not considered excessive cross-member (5.3.6 (a) (i))