MINI
MINI · Silver
Test date10 Feb 2026
Expiry—
Test number600050710223
Mileage167,415 mi
MajorExhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
MajorExhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
MajorExhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
AdvisoryExhaust emits blue smoke during acceleration (8.2.1.2 (g))
MajorExhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
DangerousNearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
AdvisoryOffside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
AdvisoryNearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
AdvisoryOffside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
AdvisoryNearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))
AdvisoryOffside Rear Brake cable damaged but not to excess (1.1.15 (a))
AdvisoryOil leak, but not excessive (8.4.1 (a) (i))
AdvisoryFront Sub-frame corroded but not seriously weakened Flaking (5.3.3 (b) (i))
AdvisoryRear Sub-frame corroded but not seriously weakened Flaking (5.3.3 (b) (i))
AdvisoryRear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
AdvisoryFront Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
AdvisoryFront Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
AdvisoryRear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
AdvisoryNearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
AdvisoryOffside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
AdvisoryExhaust has a minor leak of exhaust gases (6.1.2 (a))
AdvisoryFront Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
AdvisoryRed TPMS lamp illuminated
MajorParking brake efficiency below requirements (1.4.2 (a) (i))